Commercial Vehicle Inspection Pit Details:

• Pits from 9m – 30m
• 1000mm Wide x 1.65m deep
• 5mm pressed steel recessed side walls. 6mm pressed durbar floor sloping to central sump.
• Manufactured from Mild Steel sheets, MIG welded to form water tight sumps.
• Access stairs one end, straight or cranked ships ladder. Rail mounted if required. Please note that access stairs take up approx. 1.5m of total pit length (pptional side tunnel entrance POA).
• 150mm x 75mm deep captive jacking beam with safety stops.
• Provision for secondary floor level at 1400mm complete with removable non-slip gratings.
• Spillage sump central.
• Airline – ½” BSP Galvanised tube with 2 Double Outlets 90/110 series.
• Lighting – to suit Pit length -1.5 240v single tube luminaries Zone 2.
• 1 x low voltage socket (transformer not supplied).
• Exterior finished in black container paint. Internally de-greased and abraded prior to three coats of Zinc phosphate white and finished in white gloss enamel.
• Installation instructions and structural calculations supplied.